Test with EJBCA ClientToolBox

Use the EJBCA clientToolBox to validate the key was created and is available on the CloudHSM according to the following example:

1. Use EJBCA clientToolBox to validate key creation:
   

   #  /opt/PrimeKey/clientToolBox/ejbcaClientToolBox.sh PKCS11HSMKeyTool test /opt/PrimeKey/cloudhsm/lib/libliquidsec_pkcs11.so 1

   CODE
   When prompted for a password you must use the CloudHSM password format of username:password, for example: CryptoUser:CUPassword123!.
   
   
2. Ensure the clientToolBox outputs the results of the keys found on the CloudHSM according to the following example: